Sanjivan Solar

Pressurized Solar Water Tanks:

1. Design:

   • Pressurized solar water tanks are designed to operate under higher pressure, typically matching the pressure of the existing water supply system.
   • They often include additional safety features such as pressure relief valves to manage excess pressure and prevent system damage.

2. Applications:

   • Well-suited for residential and commercial applications where a consistent and pressurized hot water supply is essential.
   • Ideal for multi-story buildings where water needs to be delivered to various points at different elevations.

3. Performance:

   • Provides a steady and reliable flow of hot water, making it suitable for high-demand scenarios.
   • Allows for better temperature control and distribution.

4. Integration:

   • Can be integrated into existing pressurized water systems, offering an efficient upgrade for conventional water heating.

5. Complexity:

   • Generally involves a more complex installation process due to the need for pressure regulation and safety mechanisms.
   • Requires professional installation to ensure proper functioning and safety.

Non-Pressurized Solar Water Tanks:

1. Design:

   • Non-pressurized solar water tanks operate at atmospheric pressure, relying on the natural circulation of water within the system.
   • Simpler in design and typically do not include pressure relief valves or complex safety mechanisms.

2. Applications:

   • Well-suited for residential use, especially in areas with low to moderate hot water demand.
   • Commonly used in off-grid or remote locations where simplicity and reliability are priorities.

3. Performance:

   • Provides hot water through natural convection, which may result in lower flow rates compared to pressurized systems.
   • Suitable for applications where consistent pressure is not a critical factor.

4. Integration:

   • Easier to install and often requires less maintenance compared to pressurized systems.
   • Can be a cost-effective solution for individuals or communities with basic water heating needs.

5. Cost:

   • Non-pressurized systems are generally more cost-effective due to their simpler design and installation requirements.

Choosing between pressurized and non-pressurized solar water tanks depends on factors such as the specific application, hot water demand, existing infrastructure, and budget considerations. Pressurized systems are favored in situations where a consistent and pressurized hot water supply is crucial, while non-pressurized systems are chosen for their simplicity and cost-effectiveness, particularly in smaller-scale or off-grid scenarios.

Additional Information:

• Production Capacity: 25 Nos Per Month
• Delivery Time: 3 Days
• Packaging Details: Standard

ETC (Evacuated Tube Collector) Solar Water Tanks are a type of solar water heating system that utilizes evacuated tube collectors to harness solar energy for heating water. These systems are known for their efficiency and reliability in providing hot water for various domestic and industrial purposes. In particular, non-pressurized ETC solar water tanks have gained popularity for their simplicity and cost-effectiveness.

Here are key features and advantages of ETC Solar Water Tanks, specifically in a non-pressurized configuration:

1. Evacuated Tube Collectors (ETC): ETC systems consist of glass tubes with a vacuum inside, which helps in minimizing heat loss and maximizing solar absorption. Each tube contains a metal absorber coating that converts sunlight into heat, efficiently transferring it to the water within the tank.

2. Non-Pressurized Design: Unlike pressurized solar water heating systems, non-pressurized ETC solar water tanks operate at atmospheric pressure. This design simplifies the system, making it more affordable and easier to maintain. It also reduces the risk of component failure associated with high pressures.

3. Cost-Effectiveness: The non-pressurized design is cost-effective in terms of both installation and maintenance. The absence of pressure vessels and associated safety features lowers the overall system cost, making it an attractive option for budget-conscious consumers.

4. Reliability: ETC solar water tanks are known for their reliability and long life. The evacuated tube collectors are durable and resistant to weather elements, ensuring consistent performance over the years.

5. Ease of Installation: Non-pressurized systems are generally easier to install compared to pressurized counterparts. This simplicity in design allows for quicker and more straightforward installations, reducing both time and labor costs.

6. Versatility: ETC solar water tanks are versatile and suitable for various climates. They can efficiently capture solar energy even in overcast conditions, making them a practical choice for regions with less consistent sunlight.

7. Energy Efficiency: The evacuated tube collector design enhances energy efficiency by minimizing heat loss. This results in a more effective transfer of solar energy to the water, providing a higher temperature rise and better overall system performance.

8. Environmentally Friendly: By harnessing solar energy, ETC solar water tanks contribute to a reduction in greenhouse gas emissions. They are a sustainable and eco-friendly alternative to conventional water heating systems that rely on non-renewable energy sources.

Additional Information:

• Production Capacity: 100 Nos Per Month
• Delivery Time: Immediately
• Packaging Details: Standard Carton Packaging

A residential solar water tank is a key component of a solar water heating system designed to provide hot water for domestic use in homes. These systems utilize energy from the sun to heat water, reducing reliance on conventional energy sources and lowering utility costs. Here are the key features and considerations for a residential solar water tank:

Storage Tank:

• The storage tank in a residential solar water heating system stores the heated water for later use. Tanks can be made of various materials, such as glass-lined steel or stainless steel, to ensure durability and resistance to corrosion.

Insulation:

• Effective insulation is crucial to minimize heat loss from the stored water. Tanks are usually well-insulated to maintain hot water temperatures for extended periods.

System Size:

• The size of the solar water tank depends on the household's hot water demand and the climate of the region. A larger tank may be required for households with higher water consumption.

Orientation and Location:

• Proper orientation and location of solar collectors are essential to maximize exposure to sunlight. The roof or an area with unobstructed sunlight is commonly chosen for installation.

Maintenance:

• Regular maintenance, such as checking for leaks, monitoring system performance, and inspecting components, is necessary to ensure the longevity and optimal functioning of the residential solar water tank.

Residential solar water tanks offer an eco-friendly and cost-effective solution for meeting a household's hot water needs. Proper design, installation, and maintenance contribute to the efficiency and longevity of the system, making it a sustainable choice for homeowners.

Additional Information:

• Production Capacity: 25 Nos Per Month
• Delivery Time: 3 Days
• Packaging Details: Standard

A residential solar water tank is a key component of a solar water heating system designed to provide hot water for domestic use in homes. These systems utilize energy from the sun to heat water, reducing reliance on conventional energy sources and lowering utility costs. Here are the key features and considerations for a residential solar water tank:

Storage Tank:

• The storage tank in a residential solar water heating system stores the heated water for later use. Tanks can be made of various materials, such as glass-lined steel or stainless steel, to ensure durability and resistance to corrosion.

Insulation:

• Effective insulation is crucial to minimize heat loss from the stored water. Tanks are usually well-insulated to maintain hot water temperatures for extended periods.

System Size:

• The size of the solar water tank depends on the household's hot water demand and the climate of the region. A larger tank may be required for households with higher water consumption.

Orientation and Location:

• Proper orientation and location of solar collectors are essential to maximize exposure to sunlight. The roof or an area with unobstructed sunlight is commonly chosen for installation.

Maintenance:

• Regular maintenance, such as checking for leaks, monitoring system performance, and inspecting components, is necessary to ensure the longevity and optimal functioning of the residential solar water tank.

Residential solar water tanks offer an eco-friendly and cost-effective solution for meeting a household's hot water needs. Proper design, installation, and maintenance contribute to the efficiency and longevity of the system, making it a sustainable choice for homeowners.

Additional Information:

• Production Capacity: 25 Nos per Month
• Delivery Time: 3 Days
• Packaging Details: Standard